Honda ATV » Honda 250R

• A-Arms Sport Style +2+1 - Honda 250R  (17-1118) The Sport Style A-Arms are +2 wider and 1" forward placement made from 4130 chromoly steel. They come complete with new bushings, pivot tubes, and ball joints. A-arm kits also come with stainless steel tie-rods. A-Arms are backed by a LIFETIME WARRANTY (excluding normal wear items).  Note: 1) The Sport A-Arm kits use standard length shocks but require after market shocks with proper valving for optimum performance. ADD TO YOUR SHOPPING CART       A-Arm Finish No Finish - Part #00 Custom Color ( Specify in order notes) ($145.00) - Part #01 Chrome ($235.00) - Part #02 Standard Silver Vein - Part #23 Flat Black - Part #09 Gloss Black - Part #07 Silver Metallic - Part #11 Candy Blue - Part #03 Candy Red - Part #05 White ($80.00) - Part #19 Textured Black ($80.00) - Part #25 Red ($80.00) - Part #21 Bright Mettallic Red ($80.00) - Part #27 Candy Red Metallic ($80.00) - Part #17 Team Blue ($80.00) - Part #15 06 YFZ450 Blue ($80.00) - Part #13 Kawi Green ($80.00) - Part #29 DS Orange ($80.00) - Part #31 Chrome Uppers, Lowers Powder Coated Silver Vein ($115.00) - Part #24 Chrome Uppers, Lowers Powder Coated Flat Black ($115.00) - Part #10 Chrome Uppers, Lowers Powder Coated Gloss Black ($115.00) - Part #08 Chrome Uppers, Lowers Powder Coated Silver Metallic ($115.00) - Part #12 Chrome Upper, Lowers Powder Coated Candy Blue ($115.00) - Part #04 Chrome Upper, Lowers Powder Coated Candy Red ($115.00) - Part #06 Chrome Uppers, Lowers Powder Coated White ($195.00) - Part #20 Chrome Uppers, Lowers Powder Coated Textured Black ($195.00) - Part #26 Chrome Uppers, Lowers Powder Coated Red ($195.00) - Part #22 Chrome Uppers, Lowers Powder Coated Bright Metallic Red ($195.00) - Part #28 Chrome Uppers, Lowers Powder Coated Candy Red Metallic ($195.00) - Part #18 Chrome Uppers, Lowers Powder Coated Team Blue ($195.00) - Part #16 Chrome Upper, Lowers Powder Coated 06 YFZ450 Blue ($195.00) - Part #14 Chrome Uppers, Lowers Powder Coated Kawi Green ($195.00) - Part #30 Chrome Upper, Lowers Powder Coated DS Orange ($195.00) - Part #32 PRICE: $675.00 QTY:

• Elka Suspension Front Shocks (Standard Travel) - Honda Sport Models  (EF-) All shocks are triple rate with piggy back reservoirs. These shocks are valved for Non-Long Travel A-Arms. Elka shocks feature hard anodized bodies and progressive springs. All shocks are ordered specific to the rider so you can bolt them on and ride. Adjustable models allow you to fine tune your shocks for personal preference and riding conditions. If at anytime you are uncertain of your selection feel free to call our staff at 800 4LS-RACE for assistance.  Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R (+2+1) - Part #11 Honda 250X/300EX (+2+1) - Part #12 Honda 400EX (+2+0) - Part #16 Honda TRX450 (+2.5+1) - Part #40 Shock Adjustment No Adjustment Compression Only ($165.00) - Part #1 Compression & Rebound ($420.00) - Part #2 Elite Compression & Rebound ($795.00) - Part #3 A-Arm Style Sport Style - Part #1 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 125-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 225-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C- Beginner Rider - Part #3 PRICE: $775.00 QTY:

• A-Arms DC-4 Long Travel +3+1 - Honda 250R  (17-1115) The Long Travel DC-4 A-Arms are +3" wider and 1" forward and feature the easy camber &  quick caster adjust-ability. The ball joint works on a slider with a nylon jam nut so the camber can be adjusted with the ball joints still intact. The caster is now adjustable to 3 popular positions using special spacers so no extra tools are needed. DC-4 A-Arms require  use of a longer shocks for better valving. A-Arms are backed by a LIFETIME WARRANTY (excluding normal wear items). ADD TO YOUR SHOPPING CART       A-Arm Finish No Finish - Part #00 Custom Color ( Specify in order notes) ($145.00) - Part #01 Chrome ($235.00) - Part #02 Standard Silver Vein - Part #23 Flat Black - Part #09 Gloss Black - Part #07 Silver Metallic - Part #11 Candy Blue - Part #03 Candy Red - Part #05 White ($80.00) - Part #19 Textured Black ($80.00) - Part #25 Red ($80.00) - Part #21 Bright Mettallic Red ($80.00) - Part #27 Candy Red Metallic ($80.00) - Part #17 Team Blue ($80.00) - Part #15 06 YFZ450 Blue ($80.00) - Part #13 Kawi Green ($80.00) - Part #29 DS Orange ($80.00) - Part #31 Chrome Uppers, Lowers Powder Coated Silver Vein ($115.00) - Part #24 Chrome Uppers, Lowers Powder Coated Flat Black ($115.00) - Part #10 Chrome Uppers, Lowers Powder Coated Gloss Black ($115.00) - Part #08 Chrome Uppers, Lowers Powder Coated Silver Metallic ($115.00) - Part #12 Chrome Upper, Lowers Powder Coated Candy Blue ($115.00) - Part #04 Chrome Upper, Lowers Powder Coated Candy Red ($115.00) - Part #06 Chrome Uppers, Lowers Powder Coated White ($195.00) - Part #20 Chrome Uppers, Lowers Powder Coated Textured Black ($195.00) - Part #26 Chrome Uppers, Lowers Powder Coated Red ($195.00) - Part #22 Chrome Uppers, Lowers Powder Coated Bright Metallic Red ($195.00) - Part #28 Chrome Uppers, Lowers Powder Coated Candy Red Metallic ($195.00) - Part #18 Chrome Uppers, Lowers Powder Coated Team Blue ($195.00) - Part #16 Chrome Upper, Lowers Powder Coated 06 YFZ450 Blue ($195.00) - Part #14 Chrome Uppers, Lowers Powder Coated Kawi Green ($195.00) - Part #30 Chrome Upper, Lowers Powder Coated DS Orange ($195.00) - Part #32 PRICE: $950.00 QTY:

• Elka Suspension Front Shocks (Long Travel) - Honda Sport Models  (EF-) All Shocks are quadruple rate with piggy back resiviors. These shocks are valved for extened long travel A-arms that require longer shocks than factory. Elka shocks feature hard anodized bodies and pregressive springs. All shocks are ordered specific to the rider so you can bolt them on and ride. Adjustable models allow you to fine tune your shocks for personal preference and riding conditions. If at anytime you are uncertain of your selection feel free to call our staff at 800-4LS-RACE  for assistance.  Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery   ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R (+3+1) - Part #11 Honda 400EX (+3+0) - Part #16 Honda TRX450 (+2.5+1) - Part #40 Shock Adjustment Compression & Rebound - Part #2 Elite Compression & Rebound ($375.00) - Part #3 A-Arm Style DC-4 Long Travel - Part #2 XC - Cross Country (Honda TRX450 Only) - Part #3 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 125-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 225-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C- Beginner Rider - Part #3 PRICE: $1,195.00 QTY:

• Stainless Steel Front Brake Lines - Universal   Lonestar Racing Steel Braided Brake Lines feature two steel braided lines from the master cylinder all the way to the calipers, eliminating all OEM lines.  All ATV's use a 10mm bolt so the lines can be interchanged based on length.  The front kits will fit stock arms with some slack and extended A-Arms just right. ADD TO YOUR SHOPPING CART       Model of Quad Universal Front Kit 54" Long - Part #30-54 Polaris Predator & LT500 54" Long - Part #30-54P PRICE: $104.00 QTY:

• Billet Brake Line Clamps - Universal  (30-CL1) These billet brake line clamps fit 1" diameter A-Arms and most after market brake lines.  Sold in pairs (2) ADD TO YOUR SHOPPING CART       PRICE: $32.95 QTY:

• Steering Stem w / Anti-vibration Clamp - Honda 250R  (19-11) Lonestar Racing Steering Stems are made from 4130 chromoly steel.  They fit into all OEM chassis and feature an Anti-Vibration Handlebar Clamp to help reduce rider fatigue.  All Steering Stems come chrome plated for a smoother steering and a longer lasting look. Steering Stem Height: 23 3/4 Standard Height ADD TO YOUR SHOPPING CART       Height of Stem Std. +1 - Part #1 +2 - Part #2 +3 - Part #3 Forward Placement None - Part #0210 +1 - Part #1210 Clamp Kit Size OEM Size - Part #21P11604 Pro-Taper or Equivalent - Part #21P11605 PRICE: $377.00 QTY:

• Steering Stem Clamp Kit - Universal   The Steering Stem Clamp Kits are required for all Lonestar Racing steering stems.  They feature a rubber mounted system that helps reduce stem vibration and rider fatigue.  Note: 1) Please note that each model quad requires a specific clamp size.  Please check your model for exact specifications.  2) All Steering Stems purchased via the Web Site have Steering Stem Clamp Kit included in cost. ADD TO YOUR SHOPPING CART       Clamp Style Narrow Clamp - Part #21P20 Wide Clamp - Part #21P11 Clamp Kit Size 7/8 (OEM SIZE) - Part #604 1-1/8 (PRO-TAPER or EQUIVALENT) - Part #605 PRICE: $97.00 QTY:

• Steering Stem Chassis Clamp - Honda 250R  (21P11603) Steering Stem Chassis Clamps are a trick way to clamp the steering stem to the chassis.  They use the stock bushing and come with new hardware.  Will mount to stock or after market chassis. ADD TO YOUR SHOPPING CART       PRICE: $44.10 QTY:

• Streamline Hydraulic Clutch Conversion Kit - Sport Model Quads   The Streamline Hydraulic Clutch Conversion Kit converts your clutch from a cable to a hydraulic line like your brakes. This keeps the clutch easy to pull and consistent. It won't get tighter as it ages and helps reduce arm pump. Comes with everything needed to complete the conversion.  ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #SL-BT-K100 Honda 400EX - Part #SL-BT-K101 Honda TRX450 04'-05' - Part #SL-BT-K102 Honda TRX450 06'-Up - Part #SL-BT-K103 Yamaha Banshee - Part #SL-BT-K106 Yamaha YFZ450 - Part #SL-BT-K109 Yamaha Raptor 660 - Part #SL-BT-K107 Yamaha Raptor 700 - Part #SL-BT-K108 Suzuki Z400 / Kawasaki KFX400 - Part #SL-BT-K104 Suzuki LTR450 - Part #SL-BT-K105 Kawasaki KFX450 - Part #SL-BT-K110 PRICE: $249.00 QTY:

• Streamline Steering Stabilizer - All Sport Model Quads  (SL-BT-RB) For 2010 Streamline has added a few new features to their already dominating Billetanium SS7 Rebuild-able  Steering Stabilizer.  All stabilizers now come with removable  billet end caps protecting the seals from dirt and mud which cause wear to the seals.  A new billet adjusting knob has all been added.  SS7 Stabilizers offer a wide range of adjustability and performance providing 7 adjustments from soft to hard which are designed to absorb thousands of pounds of impact. ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #51- Honda 250X / 300EX - Part #51- Honda 400EX - Part #51- Honda TRX450 OEM - Part #52- Honda TRX450 LSR Stem - Part #54- Yamaha Blaster - Part #54- Yamaha Raptor 250 - Part #54- Yamaha Banshee - Part #54- Yamaha YFZ450 - Part #54- Yamaha Raptor 660 - Part #54- Yamaha Raptor 700 - Part #54- Suzuki LTZ400 / Kawasaki KFX400 - Part #53- Suzuki LTR450 - Part #54- Kawasaki KFX450 - Part #42- Can-AM DS650 - Part #54- Color Options Black - Part #BK Blue - Part #B Red - Part #R Silver - Part #S PRICE: $170.00 QTY:

• Swing Arm - Honda 250R   The Honda 250R Swing Arm is made from durable 4130 chromoly steel. It comes with the front needle bearings and uses all other OEM components. It has optional skid plate mounts but always comes with a mount for a Banshee style rear chain guide.   All Honda Swing Arms are designed to fit the stock carrier or the LSR Bearing Carriers. Note: 1) All Swing Arms come with Front Needle Bearings 2)  Swing Arm does NOT come with Bearing Carrier or Brake Caliper Plate 3) Uses Stock Chain Slider (Not Included) 4) Uses Yamaha Banshee Style Rear Chain Guide (Not Included) ADD TO YOUR SHOPPING CART       Model of Quad 1986 - 1987 - Part #15-1120 1988 - 1989 - Part #15-1220 Length Desired -2 - Part #22 -1 - Part #21 Standard Length - Part #00 +1 - Part #01 +2 - Part #02 +4 - Part #04 +6 - Part #06 Swing Arm Finish None Standard Silvervien - Part #1 Chrome ($235.00) - Part #2 Your Choice (All Colors Available) ($80.00) - Part #3 Skid Plate Mounts No Yes (Not available for -2) - Part #1 PRICE: $661.00 QTY:

• T.M. Design Works Swing Arm Protector - Honda 250R   Protection for you Lonestar Racing Swing Arm.  Product features and impregnated oil additive to virtually  eliminate friction and drag.  Exclusive design improves hook-up, acceleration, and more consistent shock performance.  Molded and machined with a race-tested new shape to reduce chain torque effect. ADD TO YOUR SHOPPING CART       Color Black Red White PRICE: $46.95 QTY:

• T.M. Designworks Rear Chain Guide - All Sport Models with LSR Swing Arm   Utilizes smooth or Powerlip roller to add more lift while speeding the chain through with zero rolling resistance and accurate tension.  Constructed with indestructible "Zero Chain Drag" sealed bearing rollers provide zero rolling resistance, consistent chain tension, and disperse sand and dirt through the bottom. Note: 1) All Lonestar Racing Swing-Arms use a Yamaha Banshee Chain Guide ADD TO YOUR SHOPPING CART       Color Black - Part #TM-RCG-002BK White - Part #TM-RCG-002 Red - Part #TM-RCG-002RD Blue - Part #TM-RCG-002BU PRICE: $49.95 QTY:

• Elka Suspension Rear Shock - Honda Sport Models  (ER-) Elka Suspension is well known for their quality and performance. All rear shocks feature adjustable compression and rebound comprable to the OEM shock and a remote reservoir. Shocks are built specific to each rider. If at anytime you are uncertain of your selection feel free to call our staff at 800 4LS-RACE for assistance. Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #11 Honda 250X / 300EX - Part #12 Honda 400EX - Part #16 Honda TRX450 '04-'05 - Part #40 Honda TRX450 '06 & Up - Part #41 Shock Adjustment Compression & Rebound - Part #2 Elite Compression & Rebound ($150.00) - Part #3 Linkage Used Stock - Part #1 Elka (Must Order Separately) - Part #2 LSR - Honda TRX450 Only (Must Order Separately) - Part #3 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 126-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 226-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C - Beginner Rider - Part #3 Swing Arm Length Stock +1" +2 +4" +6" Custom (Specify) PRICE: $895.00 QTY:

• Stainless Steel Rear Brake Line - Universal     Lonestar Racing Stainless Steel Rear Brake Lines. Quick Guide to Rear Brake Lines: HONDA ATV YAMAHA ATV Honda 250R   22" Yamaha Blaster - LSR Swing Arm 17" Honda 250X / 300EX 22" Yamaha Raptor 250 Honda 400EX 29" Yamaha Warrior - LSR Swing Arm 17" Honda TRX450 25"  Yamaha Banshee - LSR Swing Arm 17" Yamaha YFZ450 25" Yamaha YFZ450 R Yamaha Raptor 660 25" Yamaha Raptor 700 25" Suzuki ATV Kawasaki ATV Suzuki LT250 - LSR Swing Arm 25" Kawasaki KFX400 Suzuki LT500 - LSR Swing Arm 25" Kawasaki KFX450 25" Suzuki Z400 27" Suzuki LTR450 KTM ATV Polaris ATV KTM 450SX / 505SX Polaris Predator Polaris Outlaw 450MXR / 525S Can-AM ATV Can-Am DS450 Can-AM (Bombardiar) DS650 ADD TO YOUR SHOPPING CART       Lenght Needed Universal 17" - Part #30-17 Universal 22" - Part #30-22 Universal 25" - Part #30-25 Universal 27" - Part #30-27 Universal 29" - Part #30-29 Universal 32" - Part #30-32 PRICE: $40.00 QTY:

• Axcalibar Pro Racing Axle - Honda 250R  (10-119) NEW  - Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a true FULL LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lonestar Racing accessories can be used. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks with their  hard chrome finish. Axle is fully adjustable for each riders needs. FITS YEARS: '86-'89 ADJUSTABILITY: +1 to +4 INCLUDES: SPROCKET HUB, 6 SPACERS,2 TAPERED SPACERS, 2 AXLE NUTS Note: 1) This axle will also fit the '85 Honda ATC with the use of newer style sprocket and sprocket bolts. ADD TO YOUR SHOPPING CART       PRICE: $445.00 QTY:

• Billet Bearing Housing - Honda 250R   The billet aluminum bearing housings are machined from 6061 aluminum for superior housing strength. Bearing Carriers are complete, ready to drop in and ride.  They come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles. ADD TO YOUR SHOPPING CART       Model of Quad Honda 85 ATC 250R - Part #11-101 Honda 86 - 89 250R - Part #11-161 PRICE: $231.00 QTY:

• Cast Bearing Housing - Honda 250R  (35-16) The cast bearing housings feature a casted aluminum housing similar to the OEM housing and include heavy duty double row bearings and seals. They are completely sealed and pre-greased so you can just install and ride. Housings are rebuild-able. They fit stock or aftermarket swing arms and axles. ADD TO YOUR SHOPPING CART       PRICE: $180.00 QTY:

• Billet Anti-Fade Locknut - Honda 250R  (25-111) The Billet Anti-Fade Locknut is made to work with stock or Axcalibar Racing Axles.  The locknut offers a perfect solution to the trouble some stock locknut.  It combines both the Anti-Fade Locknut and the Disk Brake Hub into one unit that is easily adjusted and will not loosen by itself. ADD TO YOUR SHOPPING CART       PRICE: $231.00 QTY:

• Billet Sprocket Hub - Honda 250R  (26-161) The Billet Sprocket Hubs are made to work with the stock or Axcalibar Racing Axles.  They are designed to shave weight and provide excellent looks in comparison to OEM hubs.  Each hub has been tested under all riding conditions to ensure optimum performance. The hub features zinc coated steel rings where the hub comes in contact with the bearings and seals to prolong long life. Note: 1) All Honda Pattern Hubs are a Press Fit part and must be installed by a professional.   ADD TO YOUR SHOPPING CART       PRICE: $142.00 QTY:

• Billet Brake Caliper Mounting Kit - Honda 250R '86-'89  (21P11302) The Billet Brake Caliper mounting plate features machined cooling fins to help transfer the heat from the caliper for less brake fade. Will fit stock or aftermarket swing arms. ADD TO YOUR SHOPPING CART       PRICE: $52.45 QTY:

• Billet Front Wheel Hubs - Honda 250R   Trick light weight billet aluminum front wheel hubs. Built for race or play. Come complete with sealed bearings and a billet dust cap.  (Set of 2) Note: 1) Optional Double Bearings and X-style Caps Available at an additional cost ADD TO YOUR SHOPPING CART       Year of ATV None 1986-1987 ($372.00) - Part #12-114 1988 ($372.00) - Part #12-115 1989 ($372.00) - Part #12-116 Replacement Front Wheel Hub Caps None Standard Style Single Cap & Seal ($34.00) - Part #12-FC01 Universal X Cap Single Cap & Seal ($47.00) - Part #12-CDB03 Universal X-Cap Complete Kit (Set 2) w / Bearings ($120.00) - Part #12-CDB04 Small Front Wheel Hub Bearing ($10.00) - Part #21P00105HP Large Front Wheel Hub Bearing ($10.00) - Part #21P00104HP PRICE: $0.00 QTY:

• Billet Rear Wheel Hubs - Honda 250R  (12-111) The Lonestar Racing Rear Wheel Hubs are one piece rear wheel hubs are made from 7075 billet aluminum for an excellent weight savings over stock. The rear wheel hubs have the same  pressed in metric studs as stock hubs and will fit the OEM axle as well as the Axcalibar Racing Axle. (Set of 2) Bolt Pattern is 4 x 110 x 25 ADD TO YOUR SHOPPING CART       PRICE: $193.00 QTY:

• Racing Chassis - Honda 250R  (18-10) The Lonestar Racing Honda 250R chassis is based around the '88-'89 model but can be used with the '86-'87 components.  This chassis is designed to use all the OEM components.  It features a removable sub frame and comes with billet front motor mounts, front A-Arm hardware, and the lower steering stem bearing.  The chassis is constructed from 4130 chromoly steel and offers superior strength and durability over the OEM frame. Note: 1) Each Chassis is backed by a One Year Limited Warranty. 2) All LSR chassis come complete with a Certificate of Origin and Miscellaneous Hardware. ADD TO YOUR SHOPPING CART       Rear Suspension Setup Standard Linkage - Part #1 No-Link (Must use No-Link shock) - Part #2 Chassis Finish None - Part #1 Powder Coat - Part #2 Type of Frame Motocross - Part #1 Lite Weight (Flat Track & TT) ($262.50) - Part #2 MX / Baja - Part #3 Subframe Finish Same as Chassis - Part #1 Chrome ($175.00) - Part #2 Foot Pegs LSR Footpegs - Part #1 Integrated Pro-Peg Mounts - Part #2 PRICE: $2,310.00 QTY:

• Laker Custom Plastics - Honda 250R  (LC-250R-) Laker Custom plastic have an ultra-high gloss and superior OEM Fit.  Each of Laker Customs designs has a ground breaking appearace and is engineered to withstand the abusive conditions of racing environments. Note: 1) Laker Custom does NOT make a Tank Cover for this model quad. Front / Rear Colors Available: Black Red Blue Silver White Yellow Orange Pink Laker Custom Plastics are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Front - Color None Black ($200.00) - Part #F-BK Red ($200.00) - Part #F-RD Blue ($200.00) - Part #F-BL Silver ($200.00) - Part #F-SI White ($200.00) - Part #F-WH Yellow ($200.00) - Part #F-YL Orange ($200.00) - Part #F-OR Pink ($200.00) - Part #F-PK Rear - Color None Black ($195.00) - Part #R-BK Red ($195.00) - Part #R-RD Blue ($195.00) - Part #R-BL Silver ($195.00) - Part #R-SI White ($195.00) - Part #R-WH Yellow ($195.00) - Part #R-YL Orange ($195.00) - Part #R-OR Pink ($195.00) - Part #R-PK PRICE: $0.00 QTY:

• Seat Lock - Honda 250R  (21P11301)   Designed to replace the OEM faulty latches with designs that hold through the roughest terrain. ADD TO YOUR SHOPPING CART       PRICE: $73.45 QTY:

• Pivot Bolt - Honda 250R  (21P11322)   Hardened steel swing arm pivot bolts are far stronger than stock and yellow zinc plated for added protection against corrosion.   Note: 1) Use OEM Locknut   ADD TO YOUR SHOPPING CART       PRICE: $65.00 QTY:

• Streamline Brake Rotors - Honda 250R   For years Streamline Blade Rotors have been the most widely used brake rotors in professional ATV Racing.  That is because Streamline Blade Brake Rotors are much tougher and lighter than stock.  Streamline Brake Rotors are CAD/CAM designed, Laser Cut from 420 High Carbon Stainless Steel, Heat Treated and Diamond surface ground to insure exceptional flatness, durability, and ultimate braking power while our specially designed cooling slots dissipate heat and keep dirt away from the pads. ADD TO YOUR SHOPPING CART       Front Left Side Brake Rotor None Left Side ($96.99) - Part #SL-112 Front Right Side Brake Rotor None Right Side ($96.99) - Part #SL-113 Rear Brake Rotor None Rear ($96.99) - Part #SL-111 PRICE: $0.00 QTY:

• Streamline ATV Brake Pads - Honda 250R   Streamline Extreme Duty brake pads are hands down the best racing brake pads on the market, offering exceptional stopping power with immediate response.  Our Double HH Sintered pads are designed for instant and powerful braking force with extra long life in both wet and dry riding conditions.   Extreme Duty pads come surface ground out of the package for faster bed in.  All Streamline Brake Pads are racer tested, used and approved! ADD TO YOUR SHOPPING CART       Front Left Side Brake Pad None Left Side ($28.95) - Part #SL-BP3 Front Ride Side Brake Pad None Right Side ($28.95) - Part #SL-BP3 Rear Brake Pad None Rear ($28.95) - Part #SL-BP2 PRICE: $0.00 QTY:

• E-Brake Block Off Plate - Universal  (21P00305) The Emergency Brake Block Off Plate is used when you remove the emergency brake system from your rear brake caliper. The plate uses the OEM bolts and seals off the back. ADD TO YOUR SHOPPING CART       PRICE: $11.03 QTY:

• Edge LED ATV Head Light Kit   These HOT new 6" & 10" Edge LED light kit fits nearly all ATV's that have a DC voltage battery system. This kit also works on the non battery powered TRX450. This is the latest in lighting technology. The LED light is equivalent or brighter than HID lights in terms of brightness and color but it uses less power and there is no need for external ballasts. It is also very durable and will stand up to the elements for years to come. The entire light is self contained and uses a simple two wire hook up. It includes a powder coated bracket that will mount to narrow style (Yamaha) and wide style (Honda-Suzuki-Can-Am-Kawasaki) steering stems. Note:  1) On the YFZ450 the main power must pull directly from the battery. It can not pull from the existing headlight power.   Features: -Beam Pattern provides superior visibility for slow speed and high speed riding. -Low power draw for use with OEM type electrical systems with no extra batteries or re-wound stators needed. -Bolts on in minutes -Simple 2 wire hook up -Can be wired to use OEM switch or a switch you provide -Compatable with nearly any ATV that uses a 2 bolt or 4 bolt (narrow and wide) style handle bar clamp mount system. -Durable sealed housing with no filaments to break or burn out -Rotates with handlebars so you can see where you want to go -Ultra long life (50,000 hours which would equal 96 years if you used it for 10 hours every weekend)    Specifications: Draw: 1.98 Amps Watts: 38 Lumens: 1920 Volts: 12v-24v Size: 6"L x 3.3"H x 3"D ADD TO YOUR SHOPPING CART       Light Bar Size 6 Inch - Part #28-361 10 Inch ($106.00) - Part #28-371 PRICE: $304.00 QTY: