Honda ATV » Honda TRX450

Lonestar Racing provides performance ATV parts and accessories for the Honda TRX450.

• Axcalibar Pro Racing Axle - Honda TRX450  (10-409) NEW  - Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a true FULL LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lonestar Racing accessories can be used. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks with their  hard chrome finish. Axle is fully adjustable for each riders needs. FITS YEARS: ALL ADJUSTABILITY: STOCK TO +3 INCLUDES: SPROCKET HUB, 6 SPACERS, 2 AXLE NUTS ADD TO YOUR SHOPPING CART       PRICE: $445.00 QTY:

• Lonestar Racing DC-6 Linkage with Elka Suspension Rear Shock - '06 - Up Honda TRX 450   Clearance! Lonestar Racing DC-6 Linkage with Elka Suspension rear shock for a '06-'Up Honda TRX 450. The shock is Compression and Rebound adjustable and valved for Racing with a rider weight of 201-225lbs. ADD TO YOUR SHOPPING CART       PRICE: $850.00 QTY:

• Elka Suspension Rear Shock - '04-'05 Honda TRX 450  (ER-4021242) Clearance! Elka Suspension rear shock for the '04-'05 Honda TRX450.  This shock is Compression and Rebound adjustable and works with the stock linkage.  The shock is valved for Racing with a rider weight of 176-200lbs. ADD TO YOUR SHOPPING CART       PRICE: $625.00 QTY:

• Lonestar Racing DC-6 Linkage with Elka Elite Suspension Rear Shock - '06-Up Honda TRX 450  (ER-4133372) Clearance! Lonestar Racing DC-6 Linkage with Elka Elite Suspension rear shock for the '06-Up Honda TRX450.  This shock is Elite Compression and Rebound Adjustable. The shock is valved for Dune Riding with a rider weight of 385lbs. ADD TO YOUR SHOPPING CART       PRICE: $1,045.00 QTY:

• A-Arms Sport Style +2+1 - Honda TRX450   The sport style a-arms are +2.5" wider and 1" forward placement made from 4130 chromoly steel. They feature 3/4" upper a-arms with  quick camber and easy caster adjustments. The lower arms are 1" tubing and come complete with new bushings, pivot tubes, and ball joints. A-arm kits also come with stainless steel tie-rods. The sport kits use standard length shocks but require aftermarket shocks with proper valving for optimum performance.  A-Arms are backed by a LIFETIME WARRANTY. (excluding normal wear items). ADD TO YOUR SHOPPING CART       Year of Quad 2004-2005 - Part #17-4018 2006-2010 - Part #17-4118 A-Arm Finish No Finish - Part #00 Custom Color ( Specify in order notes) ($145.00) - Part #01 Chrome ($235.00) - Part #02 Standard Silver Vein - Part #23 Flat Black - Part #09 Gloss Black - Part #07 Silver Metallic - Part #11 Candy Blue - Part #03 Candy Red - Part #05 White ($80.00) - Part #19 Textured Black ($80.00) - Part #25 Red ($80.00) - Part #21 Bright Mettallic Red ($80.00) - Part #27 Candy Red Metallic ($80.00) - Part #17 Team Blue ($80.00) - Part #15 06 YFZ450 Blue ($80.00) - Part #13 Kawi Green ($80.00) - Part #29 DS Orange ($80.00) - Part #31 Chrome Uppers, Lowers Powder Coated Silver Vein ($115.00) - Part #24 Chrome Uppers, Lowers Powder Coated Flat Black ($115.00) - Part #10 Chrome Uppers, Lowers Powder Coated Gloss Black ($115.00) - Part #08 Chrome Uppers, Lowers Powder Coated Silver Metallic ($115.00) - Part #12 Chrome Upper, Lowers Powder Coated Candy Blue ($115.00) - Part #04 Chrome Upper, Lowers Powder Coated Candy Red ($115.00) - Part #06 Chrome Uppers, Lowers Powder Coated White ($195.00) - Part #20 Chrome Uppers, Lowers Powder Coated Textured Black ($195.00) - Part #26 Chrome Uppers, Lowers Powder Coated Red ($195.00) - Part #22 Chrome Uppers, Lowers Powder Coated Bright Metallic Red ($195.00) - Part #28 Chrome Uppers, Lowers Powder Coated Candy Red Metallic ($195.00) - Part #18 Chrome Uppers, Lowers Powder Coated Team Blue ($195.00) - Part #16 Chrome Upper, Lowers Powder Coated 06 YFZ450 Blue ($195.00) - Part #14 Chrome Uppers, Lowers Powder Coated Kawi Green ($195.00) - Part #30 Chrome Upper, Lowers Powder Coated DS Orange ($195.00) - Part #32 PRICE: $599.00 QTY:

• Elka Suspension Front Shocks (Standard Travel) - Honda Sport Models  (EF-) All shocks are triple rate with piggy back reservoirs. These shocks are valved for Non-Long Travel A-Arms. Elka shocks feature hard anodized bodies and progressive springs. All shocks are ordered specific to the rider so you can bolt them on and ride. Adjustable models allow you to fine tune your shocks for personal preference and riding conditions. If at anytime you are uncertain of your selection feel free to call our staff at 800 4LS-RACE for assistance.  Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R (+2+1) - Part #11 Honda 250X/300EX (+2+1) - Part #12 Honda 400EX (+2+0) - Part #16 Honda TRX450 (+2.5+1) - Part #40 Shock Adjustment No Adjustment Compression Only ($165.00) - Part #1 Compression & Rebound ($420.00) - Part #2 Elite Compression & Rebound ($795.00) - Part #3 A-Arm Style Sport Style - Part #1 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 125-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 225-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C- Beginner Rider - Part #3 PRICE: $775.00 QTY:

• A-Arms DC-4 Long Travel - Honda TRX450   The long travel DC-4 a-arms are +2.5" wider and 1" forward and feature the easy camber &  quick caster adjust-ability. The ball joint works on a slider with a nylon jam nut so the camber can be adjusted with the ball joints still intact. The caster is now adjustable to 3 popular positions using special spacers so no extra tools are needed. They use longer shocks for better valving. The 2006 TRX A-arms are 1/2" narrower and have a plate with a star on the upper a-arm to help identify them.  A-Arms are backed by a LIFETIME WARRANTY (excluding normal wear items). 20" L0NG SHOCK 5 3/8" SHAFT LENGTH LEVERAGE RATIO: 2.0 TO 1 10.75" WHEEL TRAVEL 1 1/2" GROUND CLEARANCE WITH 18" TIRES ADD TO YOUR SHOPPING CART       Year of Quad 2004-2005 - Part #17-4015 2006-2009 - Part #17-4115 A-Arm Finish No Finish - Part #00 Chrome ($235.00) - Part #02 Custom Color ( Specify in order notes) ($145.00) - Part #01 Standard Silver Vein - Part #23 Flat Black - Part #09 Gloss Black - Part #07 Silver Metallic - Part #11 Candy Blue - Part #03 Candy Red - Part #05 White ($80.00) - Part #19 Textured Black ($80.00) - Part #25 Red ($80.00) - Part #21 Bright Mettallic Red ($80.00) - Part #27 Candy Red Metallic ($80.00) - Part #17 Team Blue ($80.00) - Part #15 06 YFZ450 Blue ($80.00) - Part #13 Kawi Green ($80.00) - Part #29 DS Orange ($80.00) - Part #31 Chrome Uppers, Lowers Powder Coated Silver Vein ($115.00) - Part #24 Chrome Uppers, Lowers Powder Coated Flat Black ($115.00) - Part #10 Chrome Uppers, Lowers Powder Coated Gloss Black ($115.00) - Part #08 Chrome Uppers, Lowers Powder Coated Silver Metallic ($115.00) - Part #12 Chrome Upper, Lowers Powder Coated Candy Blue ($115.00) - Part #04 Chrome Upper, Lowers Powder Coated Candy Red ($115.00) - Part #06 Chrome Uppers, Lowers Powder Coated White ($195.00) - Part #20 Chrome Uppers, Lowers Powder Coated Textured Black ($195.00) - Part #26 Chrome Uppers, Lowers Powder Coated Red ($195.00) - Part #22 Chrome Uppers, Lowers Powder Coated Bright Metallic Red ($195.00) - Part #28 Chrome Uppers, Lowers Powder Coated Candy Red Metallic ($195.00) - Part #18 Chrome Uppers, Lowers Powder Coated Team Blue ($195.00) - Part #16 Chrome Upper, Lowers Powder Coated 06 YFZ450 Blue ($195.00) - Part #14 Chrome Uppers, Lowers Powder Coated Kawi Green ($195.00) - Part #30 Chrome Upper, Lowers Powder Coated DS Orange ($195.00) - Part #32 PRICE: $840.00 QTY:

• A-Arms XC DC-4 Long Travel - Honda TRX450   These  XC a-arms are specifically designed for the cross country rider in mind. They are made a 1/2" wider and 3/4" forward and shaped for optimal ground clearance. The shock mount has been re-located to use a longer 18.25" shock for better valving and improved adjust-ability. Each kit features easy camber and quick caster adjust-ability. Come with stainless steel tie-rods, ball joints, bushings, and pivot tubes.  A-Arms are backed by a LIFETIME WARRANTY (excluding normal wear items) SHOCK SPECS: 18 1/4" LONG 4 7/8" SHAFT 10 3/4" WHEEL TRAVEL 2.2 TO 1 STATIC LEVERAGE RATIO 1 3/4" GROUND CLEARANCE WITH 22" TIRE ADD TO YOUR SHOPPING CART       Year Of Quad 2004-2005 - Part #17-4014 2006-2009 - Part #17-4114 A-Arm Finish No Finish - Part #00 Custom Color ( Specify in order notes) ($145.00) - Part #01 Chrome ($235.00) - Part #02 Standard Silver Vein - Part #23 Flat Black - Part #09 Gloss Black - Part #07 Silver Metallic - Part #11 Candy Blue - Part #03 Candy Red - Part #05 White ($80.00) - Part #19 Textured Black ($80.00) - Part #25 Red ($80.00) - Part #21 Bright Mettallic Red ($80.00) - Part #27 Candy Red Metallic ($80.00) - Part #17 Team Blue ($80.00) - Part #15 06 YFZ450 Blue ($80.00) - Part #13 Kawi Green ($80.00) - Part #29 DS Orange ($80.00) - Part #31 Chrome Uppers, Lowers Powder Coated Silver Vein ($115.00) - Part #24 Chrome Uppers, Lowers Powder Coated Flat Black ($115.00) - Part #10 Chrome Uppers, Lowers Powder Coated Gloss Black ($115.00) - Part #08 Chrome Uppers, Lowers Powder Coated Silver Metallic ($115.00) - Part #12 Chrome Upper, Lowers Powder Coated Candy Blue ($115.00) - Part #04 Chrome Upper, Lowers Powder Coated Candy Red ($115.00) - Part #06 Chrome Uppers, Lowers Powder Coated White ($195.00) - Part #20 Chrome Uppers, Lowers Powder Coated Textured Black ($195.00) - Part #26 Chrome Uppers, Lowers Powder Coated Red ($195.00) - Part #22 Chrome Uppers, Lowers Powder Coated Bright Metallic Red ($195.00) - Part #28 Chrome Uppers, Lowers Powder Coated Candy Red Metallic ($195.00) - Part #18 Chrome Uppers, Lowers Powder Coated Team Blue ($195.00) - Part #16 Chrome Upper, Lowers Powder Coated 06 YFZ450 Blue ($195.00) - Part #14 Chrome Uppers, Lowers Powder Coated Kawi Green ($195.00) - Part #30 Chrome Upper, Lowers Powder Coated DS Orange ($195.00) - Part #32 PRICE: $849.00 QTY:

• Elka Suspension Front Shocks (Long Travel) - Honda Sport Models  (EF-) All Shocks are quadruple rate with piggy back resiviors. These shocks are valved for extened long travel A-arms that require longer shocks than factory. Elka shocks feature hard anodized bodies and pregressive springs. All shocks are ordered specific to the rider so you can bolt them on and ride. Adjustable models allow you to fine tune your shocks for personal preference and riding conditions. If at anytime you are uncertain of your selection feel free to call our staff at 800-4LS-RACE  for assistance.  Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery   ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R (+3+1) - Part #11 Honda 400EX (+3+0) - Part #16 Honda TRX450 (+2.5+1) - Part #40 Shock Adjustment Compression & Rebound - Part #2 Elite Compression & Rebound ($375.00) - Part #3 A-Arm Style DC-4 Long Travel - Part #2 XC - Cross Country (Honda TRX450 Only) - Part #3 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 125-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 225-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C- Beginner Rider - Part #3 PRICE: $1,195.00 QTY:

• Fox Float X Evol Front Shocks (Long Travel) - Honda TRX450  (FX-) The Float X Evol shocks are Fox's top of the line shocks with full compression and rebound adjustability.   Fox: In Racing, everyone knows taking a different line is always the best way to get into the lead. Not following the pack has been the inspiration for our high performance line of racing shocks specifically designed and engineered for ATV racing. The innovative FLOAT X EVOL AirShox deliver an ultra-wide range of externally adjustable compression and rebound damping with infinite dual-stage air spring adjustability ... springs are history. If at anytime you are uncertain of your selection feel free to call our staff at 800-4LS-RACE  for assistance. Fox Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda TRX450 - Part #403 A-Arm Style DC-4 Long Travel - Part #12 XC - Cross Country - Part #32 Rider Weight 100-140 - Part #12 141-199 - Part #22 200-250 - Part #32 PRICE: $1,495.00 QTY:

• Stainless Steel Front Brake Lines - Universal   Lonestar Racing Steel Braided Brake Lines feature two steel braided lines from the master cylinder all the way to the calipers, eliminating all OEM lines.  All ATV's use a 10mm bolt so the lines can be interchanged based on length.  The front kits will fit stock arms with some slack and extended A-Arms just right. ADD TO YOUR SHOPPING CART       Model of Quad Universal Front Kit 54" Long - Part #30-54 Polaris Predator & LT500 54" Long - Part #30-54P PRICE: $104.00 QTY:

• Billet Brake Line Clamps - Universal  (30-CL1) These billet brake line clamps fit 1" diameter A-Arms and most after market brake lines.  Sold in pairs (2) ADD TO YOUR SHOPPING CART       PRICE: $32.95 QTY:

• Steering Stem w / Anti-vibration Clamp - Honda TRX450  (19-40) Anti-vibration Steering Stem - Honda Trx450  Anti-Vibration Steering Stems are made from 4130 chromoly steel and come with a billet aluminum clamp kit and mounting plate for the key and oil light.  Note: 1) Steering Stabilizer info - Effective 11/5/08,  TRX450 stem diameter is1.25" OD. Stem Height 27 11/16 ADD TO YOUR SHOPPING CART       Height of Stem Stock +1 - Part #1 +2 - Part #2 +3 - Part #3 Forward Placement None - Part #0210 +1 - Part #1210 Clamp Kit Size OEM 7/8 - Part #21P11604 Oversize 1 1/8 - Part #21P11605 PRICE: $377.00 QTY:

• Steering Stem Clamp Kit - Universal   The Steering Stem Clamp Kits are required for all Lonestar Racing steering stems.  They feature a rubber mounted system that helps reduce stem vibration and rider fatigue.  Note: 1) Please note that each model quad requires a specific clamp size.  Please check your model for exact specifications.  2) All Steering Stems purchased via the Web Site have Steering Stem Clamp Kit included in cost. ADD TO YOUR SHOPPING CART       Clamp Style Narrow Clamp - Part #21P20 Wide Clamp - Part #21P11 Clamp Kit Size 7/8 (OEM SIZE) - Part #604 1-1/8 (PRO-TAPER or EQUIVALENT) - Part #605 PRICE: $97.00 QTY:

• Steering Stem Chassis Clamp - Honda TRX450  (21P406031) Trick billet clamp holds the steering stem securely to the chassis. The clamp will mount to the stock chassis using the OEM bushing. ADD TO YOUR SHOPPING CART       PRICE: $22.50 QTY:

• Streamline Hydraulic Clutch Conversion Kit - Sport Model Quads   The Streamline Hydraulic Clutch Conversion Kit converts your clutch from a cable to a hydraulic line like your brakes. This keeps the clutch easy to pull and consistent. It won't get tighter as it ages and helps reduce arm pump. Comes with everything needed to complete the conversion.  ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #SL-BT-K100 Honda 400EX - Part #SL-BT-K101 Honda TRX450 04'-05' - Part #SL-BT-K102 Honda TRX450 06'-Up - Part #SL-BT-K103 Yamaha Banshee - Part #SL-BT-K106 Yamaha YFZ450 - Part #SL-BT-K109 Yamaha Raptor 660 - Part #SL-BT-K107 Yamaha Raptor 700 - Part #SL-BT-K108 Suzuki Z400 / Kawasaki KFX400 - Part #SL-BT-K104 Suzuki LTR450 - Part #SL-BT-K105 Kawasaki KFX450 - Part #SL-BT-K110 PRICE: $249.00 QTY:

• Streamline Steering Stabilizer - All Sport Model Quads  (SL-BT-RB) For 2010 Streamline has added a few new features to their already dominating Billetanium SS7 Rebuild-able  Steering Stabilizer.  All stabilizers now come with removable  billet end caps protecting the seals from dirt and mud which cause wear to the seals.  A new billet adjusting knob has all been added.  SS7 Stabilizers offer a wide range of adjustability and performance providing 7 adjustments from soft to hard which are designed to absorb thousands of pounds of impact. ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #51- Honda 250X / 300EX - Part #51- Honda 400EX - Part #51- Honda TRX450 OEM - Part #52- Honda TRX450 LSR Stem - Part #54- Yamaha Blaster - Part #54- Yamaha Raptor 250 - Part #54- Yamaha Banshee - Part #54- Yamaha YFZ450 - Part #54- Yamaha Raptor 660 - Part #54- Yamaha Raptor 700 - Part #54- Suzuki LTZ400 / Kawasaki KFX400 - Part #53- Suzuki LTR450 - Part #54- Kawasaki KFX450 - Part #42- Can-AM DS650 - Part #54- Color Options Black - Part #BK Blue - Part #B Red - Part #R Silver - Part #S PRICE: $170.00 QTY:

• Swing Arm - Honda TRX450  (15-4020) The Honda TRX450 Swing Arm is made from durable 4130 chromoly steel. It comes with the front needle bearings and uses all other OEM components. It has optional skid plate mounts but always comes with a mount for a Banshee style rear chain guide.   All Honda Swing Arms are designed to fit the stock carrier or the LSR Bearing Carriers. Note: 1) All Swing Arms come with Front Needle Bearings 2)  Swing Arm does NOT come with Bearing Carrier or Brake Caliper Plate 3) Uses Stock Chain Slider (Not Included) 4) Uses Yamaha Banshee Style Rear Chain Guide (Not Included) ADD TO YOUR SHOPPING CART       Length Desired -1 - Part #21 Standard - Part #00 +1 - Part #01 +2 - Part #02 +4 - Part #04 +6 - Part #06 Swing Arm Finish None Std. Silvervein - Part #1 Chrome ($235.00) - Part #2 Custom Color ( Specify in Notes) ($80.00) - Part #3 Skid Plate Mounts Yes - Part #121 No - Part #120 PRICE: $609.00 QTY:

• T.M. Design Works Swing Arm Protector - Honda TRX450   Protection for you Lonestar Racing Swing Arm.  Product features and impregnated oil additive to virtually  eliminate friction and drag.  Exclusive design improves hook-up, acceleration, and more consistent shock performance.  Molded and machined with a race-tested new shape to reduce chain torque effect. ADD TO YOUR SHOPPING CART       Color Black Red PRICE: $49.95 QTY:

• T.M. Designworks Rear Chain Guide - All Sport Models with LSR Swing Arm   Utilizes smooth or Powerlip roller to add more lift while speeding the chain through with zero rolling resistance and accurate tension.  Constructed with indestructible "Zero Chain Drag" sealed bearing rollers provide zero rolling resistance, consistent chain tension, and disperse sand and dirt through the bottom. Note: 1) All Lonestar Racing Swing-Arms use a Yamaha Banshee Chain Guide ADD TO YOUR SHOPPING CART       Color Black - Part #TM-RCG-002BK White - Part #TM-RCG-002 Red - Part #TM-RCG-002RD Blue - Part #TM-RCG-002BU PRICE: $49.95 QTY:

• Shock Linkage DC-6 - Honda TRX450  (21P40304) The DC-6 linkage is designed to work with the stock 2006 & up swing arms or the Lone Star swing arm. It is designed to reduce the shock kick by changing the leverage ratio for smoother shock motion. It also allows for a longer shock for better valving and spring ratios. A aftermarket shock is required for proper performance. MX -Use 16-3/8" Shock 2.44 TO 1 XC- Use 16-1/8" Shock 2.36 TO 1 Ratio ADD TO YOUR SHOPPING CART       PRICE: $255.00 QTY:

• Swing Arm with Outlaw Linkage - Honda TRX450 '04-'05  (15-41200) The Outlaw Swing Arm and Linkage combo have proven quite popular among the Honda TRX450 '04-'05 owners. The problem with the stock linkage is that the leverage ratio is not consistent through the full travel of the shock. In lamens terms, everything feels good until the shock is heavily compressed, at that point the shock wants to pogo the rider off the quad. The solution is this trick new billet aluminum linkage in combination with this specially designed LSR swing arm. This setup not only fixes the leverage ratio but also allows for a longer shock which can give you more adjust-ability and more shock options. Each kit comes complete with all necessary hardware bearings and seals and is completely compatible with the stock chassis.This swing arm is recommended for groomed MX tracks. For rough or rocky tracks where you need the little bit extra ground clearance we recommend the standard LSR swing arm with DC-6 linkage. Note: 1) All Swing Arms come with Front Needle Bearings 2)  Swing Arm does NOT come with Bearing Carrier or Brake Caliper Plate 3) Uses Stock Chain Slider (Not Included) 4) Uses Yamaha Banshee Style Rear Chain Guide (Not Included) ADD TO YOUR SHOPPING CART       SIZE DESIRED Standard +1 - Part #1 Swing Arm Finish Standard Silvervein - Part #1 Chrome ($200.00) - Part #2 Custom Color ( Specify in order notes) ($60.00) - Part #3 Skid Plate Mounts Yes (comes with a stainless skid plate) ($162.00) - Part #121 No - Part #120 PRICE: $1,109.00 QTY:

• Elka Suspension Rear Shock - Honda Sport Models  (ER-) Elka Suspension is well known for their quality and performance. All rear shocks feature adjustable compression and rebound comprable to the OEM shock and a remote reservoir. Shocks are built specific to each rider. If at anytime you are uncertain of your selection feel free to call our staff at 800 4LS-RACE for assistance. Elka Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda 250R - Part #11 Honda 250X / 300EX - Part #12 Honda 400EX - Part #16 Honda TRX450 '04-'05 - Part #40 Honda TRX450 '06 & Up - Part #41 Shock Adjustment Compression & Rebound - Part #2 Elite Compression & Rebound ($150.00) - Part #3 Linkage Used Stock - Part #1 Elka (Must Order Separately) - Part #2 LSR - Honda TRX450 Only (Must Order Separately) - Part #3 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 126-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 226-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C - Beginner Rider - Part #3 Swing Arm Length Stock +1" +2 +4" +6" Custom (Specify) PRICE: $895.00 QTY:

• Fox Podium X Rear Shock - Honda TRX450  (FXR-) Fox shocks are well proven throughout the industry for excellent performance at great price. All shocks have compression and rebound adjust ability. If at anytime you are uncertain of your selection feel free to call our staff at 800-4LS-RACE for assistance. Fox Suspension Shocks are made to order so please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Model Of Quad Honda TRX450 '04-'05 - Part #402 Honda TRX450 '06 & Up - Part #412 Linkage Used Stock - Part #1 LSR (Must order linkage seperately) - Part #3 Valve Setting Recreational Dirt - Part #1 Racing - Part #2 Dune Riding - Part #3 Rider Weight 100-125 - Part #1 126-150 - Part #2 151-175 - Part #3 176-200 - Part #4 201-225 - Part #5 226-250 - Part #6 250+ - Part #7 Skill Level A - Advanced Rider - Part #1 B - Intermediate Rider - Part #2 C - Beginner Rider - Part #3 Swing Arm Length Stock +1" +2" Custom ( Specify) PRICE: $995.00 QTY:

• Stainless Steel Rear Brake Line - Universal     Lonestar Racing Stainless Steel Rear Brake Lines. Quick Guide to Rear Brake Lines: HONDA ATV YAMAHA ATV Honda 250R   22" Yamaha Blaster - LSR Swing Arm 17" Honda 250X / 300EX 22" Yamaha Raptor 250 Honda 400EX 29" Yamaha Warrior - LSR Swing Arm 17" Honda TRX450 25"  Yamaha Banshee - LSR Swing Arm 17" Yamaha YFZ450 25" Yamaha YFZ450 R Yamaha Raptor 660 25" Yamaha Raptor 700 25" Suzuki ATV Kawasaki ATV Suzuki LT250 - LSR Swing Arm 25" Kawasaki KFX400 Suzuki LT500 - LSR Swing Arm 25" Kawasaki KFX450 25" Suzuki Z400 27" Suzuki LTR450 KTM ATV Polaris ATV KTM 450SX / 505SX Polaris Predator Polaris Outlaw 450MXR / 525S Can-AM ATV Can-Am DS450 Can-AM (Bombardiar) DS650 ADD TO YOUR SHOPPING CART       Lenght Needed Universal 17" - Part #30-17 Universal 22" - Part #30-22 Universal 25" - Part #30-25 Universal 27" - Part #30-27 Universal 29" - Part #30-29 Universal 32" - Part #30-32 PRICE: $40.00 QTY:

• Axcalibar Racing Axle - Honda TRX450  (10-40) Axcalibar Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a true FULL LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lonestar Racing accessories can be used. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks with their triple plate chrome finish. Axle is fully adjustable for each riders needs. FITS YEARS: ALL ADJUSTABILITY: STOCK TO +3 INCLUDES: SPROCKET HUB, 6 SPACERS, 2 AXLE NUTS ADD TO YOUR SHOPPING CART       PRICE: $420.00 QTY:

• Billet Bearing Housing - Honda TRX450  (11-401) The billet aluminum bearing housings are machined from 6061 aluminum for superior housing strength. The comecomplete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles. ADD TO YOUR SHOPPING CART       PRICE: $231.00 QTY:

• Cast Bearing Housing - Honda TRX450  (35-40) The cast bearing housings feature a casted aluminum housing similar to the OEM housing and include heavy duty double row bearings and seals. They are completely sealed and pre-greased so you can just install and ride. Housings are rebuild-able. They fit stock or aftermarket swing arms and axles. ADD TO YOUR SHOPPING CART       PRICE: $180.00 QTY:

• Billet Brake Caliper Mounting Kit - Honda TRX450  (21P40302) The caliper mounting plate features machined cooling fins to help transfer the heat from the caliper for less brake fade. Will fit stock or aftermarket swing arms. ADD TO YOUR SHOPPING CART       PRICE: $65.00 QTY:

• Billet Anti-Fade Locknut - Honda TRX450  (25-401) The Lonestar Racing Anti-Fade Locknut is the perfect solution to the troublesome stock locknut. It combines both the locknut and disc brake hub into one unit that is easily adjusted and will not loosen by itself. ADD TO YOUR SHOPPING CART       PRICE: $231.00 QTY:

• Billet Sprocket Hub - Honda TRX450  (26-401) Axcalibar racing axles come with this sprocket hub already installed, however you may purchase it as a replacement part for the both the stock or Axcalibar axle.  Note: 1) This is a PRESS FIT part ADD TO YOUR SHOPPING CART       PRICE: $142.00 QTY:

• Billet Front Wheel Hubs - Honda TRX450   Trick light weight billet aluminum front wheel hubs. Built for race or play. Come complete with sealed bearings and a billet dust cap.  (Set of 2) Note: 1) Optional Double Bearings and X-style Caps Available at an additional cost ADD TO YOUR SHOPPING CART       Year of Quad None 2004-2005 ($322.00) - Part #12-404 2006-Up ($322.00) - Part #12-167 Replacement Front Wheel Hub Caps None Standard Style Single Cap & Seal ($34.00) - Part #12-FC01 Universal X-Cap Single Cap & Seal ($47.00) - Part #12-CDB03 Universal X-Cap Complete Kit (Set 2) w / Bearings ($120.00) - Part #12-CDB04 Small Front Wheel Hub Bearings ($10.00) - Part #21P00105HP Large Front Wheel Hub Bearings ($10.00) - Part #21P00104HP PRICE: $0.00 QTY:

• Billet Rear Wheel Hubs - Honda TRX450  (12-401) The Lonestar Racing Rear Wheel Hubs are one piece rear wheel hubs are made from 7075 billet aluminum for an excellent weight savings over stock. The rear wheel hubs have the same  pressed in metric studs as stock hubs and will fit the OEM axle as well as the Axcalibar Racing Axle. (Set of 2) Bolt Pattern is 4 x 110 x 24 ADD TO YOUR SHOPPING CART       PRICE: $236.00 QTY:

• Front Spindle Shafts - Honda TRX450  (10-401) The front spindle shafts press directly into your stock spindles. They are machined from the same material as the Axcalibar Racing Axles, heat treated, and chromed for improved strength over the OEM shafts. (Sold In Pair) ADD TO YOUR SHOPPING CART       PRICE: $75.00 QTY:

• Streamline ATV Brake Pads - Honda TRX450   Streamline Extreme Duty brake pads are hands down the best racing brake pads on the market, offering exceptional stopping power with immediate response.  Our Double HH Sintered pads are designed for instant and powerful braking force with extra long life in both wet and dry riding conditions.   Extreme Duty pads come surface ground out of the package for faster bed in.  All Streamline Brake Pads are racer tested, used and approved! ADD TO YOUR SHOPPING CART       Front Left Side Brake Pad None Left Side ($28.95) - Part #SL-BP11 Front Right Side Brake Pad None Right Side ($28.95) - Part #SL-BP11 Rear Brake Pad None Rear ($28.95) - Part #SL-BP10 PRICE: $0.00 QTY:

• Streamline Brake Rotors - Honda TRX450   For years Streamline Blade Rotors have been the most widely used brake rotors in professional ATV Racing.  That is because Streamline Blade Brake Rotors are much tougher and lighter than stock.  Streamline Brake Rotors are CAD/CAM designed, Laser Cut from 420 High Carbon Stainless Steel, Heat Treated and Diamond surface ground to insure exceptional flatness, durability, and ultimate braking power while our specially designed cooling slots dissipate heat and keep dirt away from the pads. ADD TO YOUR SHOPPING CART       Front Left Side Brake Rotor None Left Side ($96.99) - Part #SL-112 Front Right Side Brake Rotor None Right Side ($96.99) - Part #SL-113 Rear Brake Rotor None Rear ($96.99) - Part #SL-401 PRICE: $0.00 QTY:

• Stainless Sprocket Guard - Honda TRX450   The sprocket guards are excellent for XC or MX applications where ground clearance is a must. This heavy duty sprocket guard protects the sprocket and chain from rocks and debris. Pair up with the rotor guard for best protection. ADD TO YOUR SHOPPING CART       Sprocket Size 35-38 - Part #21P40332 39-41 - Part #21P40331 PRICE: $49.95 QTY:

• Stainless Disc Rotor Guard - Honda TRX450  (21P40333) This heavy duty stainless rotor guard is a must for XC or MX racing where ground clearance is a must. It protects the rotor from rocks and debris without having to use a full skid plate. Pair up with the sprocket guard for ultimate protection. ADD TO YOUR SHOPPING CART       PRICE: $95.00 QTY:

• Rear Fender Braces - Honda TRX450  (21P40324) The TRX fender braces are made from 4130 chromoly steel. They are designed to offer superior support of the rear fenders. They are chrome plated to prevent corrosion. Sold in Pairs (2) ADD TO YOUR SHOPPING CART       PRICE: $65.00 QTY:

• Rear Fender Fastners - Honda TRX450 '04-'05  (21P40306) This simple modification is the easiest way to fix the common problem of the front fairings of the rear fenders popping out while riding. This setup uses a simple quick release screws and stop plates that installs with little modification and holds just as well as the competitions $80.00 solution. 1 set fixes both sides. For the '04-05 Honda TRX450 ADD TO YOUR SHOPPING CART       PRICE: $10.00 QTY:

• Seat Latch - Honda TRX450  (21P40301) The TRX450 seat latch prevents the seat from unlatching itself during racing or riding conditions which is a larger problem than most think. Sleek design installs easily in minutes and is chrome plated for corrosion resistance. ADD TO YOUR SHOPPING CART       PRICE: $40.00 QTY:

• E-Brake Block Off Plate - Universal  (21P00305) The Emergency Brake Block Off Plate is used when you remove the emergency brake system from your rear brake caliper. The plate uses the OEM bolts and seals off the back. ADD TO YOUR SHOPPING CART       PRICE: $11.03 QTY:

• Nerf Bars DC-Pro - Specific Sport Models   DC-Pro Peg Nerf Bars were designed based on the collective input from riders and racers all around the world. The DC-Pro Nerf Bars features include a wider foot peg stance with inner crisscross teeth to reduce boot wear.  A full 50” mounted width and universal removable heal guards. Both the foot pegs and heal guards were designed to help drain out mud and water to avoid clumping. The side profile features an aggressive rake to help prevent tangling with other quads in racing applications. All wear items are completely replaceable and the overall pro peg is universal to fit most sport quads just using different hardware packages. So if you change quads you do not need to buy a complete new set of nerf bars. The nerf bars are constructed of high quality 6061 aluminum tubing and fully tig welded for superior strength and durability. Note: 1) These are just the nerf bars. You must order the mounting kit below for installation. ADD TO YOUR SHOPPING CART       Nerf Bar Finish Raw Aluminum - Part #40-N010 Gloss Black ($15.00) - Part #40-N011 PRICE: $275.00 QTY:

• Nerf Bars DC-Pro Mounting Kits - Specific Sport Models   DC-Pro Nerf Bar Mounting Kits.  These mounting kits adapt the DC-Pro Nerf Bars to your specific quad Note: 1) Required for installation ADD TO YOUR SHOPPING CART       Model Of Quad Honda TRX450 - Part #40-M4001 Yamaha YFZ450 - Part #40-M3801 Yamaha YFZ450 R - Part #40-M4701 Yamaha Raptor 700 ($30.00) - Part #40-M4201 Suzuki LTR450 - Part #40-M5001 Kawasaki KFX450 - Part #40-M5501 KTM 450SX / 505SX - Part #40-M7001 Polaris Outlaw 450MXR / 525S - Part #40-M6001 PRICE: $70.00 QTY:

• Nerf Bars DC-Pro Heelguards - Specific Sport Models   DC-Pro Heal Guards are universal to all DC-Pro Nerf Bars.  Note: 1) Only Sold in Pairs ADD TO YOUR SHOPPING CART       Heelguard Finish Raw Aluminum - Part #40-H010 Gloss Black ($5.00) - Part #40-H011 PRICE: $105.00 QTY:

• Racing Chassis - Honda TRX450  (18-402230) The new Honda TRX450 chassis is made from 4130 chromoly steel. It is designed to use most all of the OEM components including the stock sub frame. It has optional pro peg mounts and tabs for optional CRF450 elctronics which is used by many racers to eliminate all of the lighting and improve spark. ADD TO YOUR SHOPPING CART       Foot Peg Mounts Stock Pegs - Part #1 Pro Peg Mounts - Part #2 Electrical Stock Electrical - Part #2 CRF450 Electrical - Part #1 Year Of Quad '04-'05 '06-'09 - Part #1 PRICE: $2,310.00 QTY:

• Gusset Kit For Stock Frame - Honda TRX450  (18-410) The TRX gusset kit includes a series of laser cut tabs and pre cut tubes to strengthen the high stress areas of the chassis and help prevent against premature fatigue or failure. We recommend the kits be tig welded by a professional for proper results. Note: 1) LSR Installation: Includes sand blasting, welding, and re powder coating. $405.00 ADD TO YOUR SHOPPING CART       PRICE: $135.00 QTY:

• Laker Custom Plastics - Honda TRX450  (LC-450-) Laker Custom plastic have an ultra-high gloss and superior OEM Fit.  Each of Laker Customs designs has a ground breaking appearace and is engineered to withstand the abusive conditions of racing environments. Front Fender Styles Available: Full Fender Race Cut Drag Cut Front  / Rear Colors Available: Black Red Blue White Yellow Silver Orange Pink Hood Colors Available: Black Red Blue White Yellow Silver Orange Pink Laker Custom Plastics are made to order please allow 2-3 weeks for delivery ADD TO YOUR SHOPPING CART       Front Fender - Style Full Fender Race Cut Drag Cut Front - Color None Black ($225.00) - Part #F-BK Red ($225.00) - Part #F-RD Blue ($225.00) - Part #F-BL White ($225.00) - Part #F-WH Yellow ($225.00) - Part #F-YL Silver ($225.00) - Part #F-SI Orange ($225.00) - Part #F-OR Pink ($225.00) - Part #F-PK Rear - Color None Black ($205.00) - Part #R-BK Red ($205.00) - Part #R-RD Blue ($205.00) - Part #R-BL White ($205.00) - Part #R-BL Yellow ($205.00) - Part #R-YL Silver ($205.00) - Part #R-SI Orange ($205.00) - Part #R-OR Pink ($205.00) - Part #R-PK Hood - Color None Black ($37.50) - Part #FH-BK Red ($37.50) - Part #FH-RD Blue ($37.50) - Part #FH-BL White ($37.50) - Part #FH-WH Yellow ($37.50) - Part #FH-YL Silver ($37.50) - Part #FH-SI Orange ($37.50) - Part #FH-OR Pink ($37.50) - Part #FH-PK PRICE: $0.00 QTY:

• Graphic Kit Silver - Honda TRX450  (37-402) Silver  Honda TRX450 Graphic Kit Kit includes: 1) Graphic Kit 2) Seat Cover ADD TO YOUR SHOPPING CART       PRICE: $129.95 QTY:

• Edge LED ATV Head Light Kit   These HOT new 6" & 10" Edge LED light kit fits nearly all ATV's that have a DC voltage battery system. This kit also works on the non battery powered TRX450. This is the latest in lighting technology. The LED light is equivalent or brighter than HID lights in terms of brightness and color but it uses less power and there is no need for external ballasts. It is also very durable and will stand up to the elements for years to come. The entire light is self contained and uses a simple two wire hook up. It includes a powder coated bracket that will mount to narrow style (Yamaha) and wide style (Honda-Suzuki-Can-Am-Kawasaki) steering stems. Note:  1) On the YFZ450 the main power must pull directly from the battery. It can not pull from the existing headlight power.   Features: -Beam Pattern provides superior visibility for slow speed and high speed riding. -Low power draw for use with OEM type electrical systems with no extra batteries or re-wound stators needed. -Bolts on in minutes -Simple 2 wire hook up -Can be wired to use OEM switch or a switch you provide -Compatable with nearly any ATV that uses a 2 bolt or 4 bolt (narrow and wide) style handle bar clamp mount system. -Durable sealed housing with no filaments to break or burn out -Rotates with handlebars so you can see where you want to go -Ultra long life (50,000 hours which would equal 96 years if you used it for 10 hours every weekend)    Specifications: Draw: 1.98 Amps Watts: 38 Lumens: 1920 Volts: 12v-24v Size: 6"L x 3.3"H x 3"D ADD TO YOUR SHOPPING CART       Light Bar Size 6 Inch - Part #28-361 10 Inch ($106.00) - Part #28-371 PRICE: $304.00 QTY:

• Pro Armor Rear Grab Bar - Honda TRX450 '04-'05  (PAH042059) Clearance! Pro Race Rear Grab Bar by Pro Armor  Fits '04-'05 TRX450. Light weight design, built to help you maneuver your quad when you are loading your bike or stuck in harsh racing conditions. ADD TO YOUR SHOPPING CART       PRICE: $70.00 QTY:

• Pro Armor Rear Grab Bar - Honda TRX450  (PAH042061) Clearance! Rear Grab Bar by Pro Armor Fits '04-'05 Honda TRX450 Light weight design, built to help you maneuver your quad when you are loading your bike or stuck in harsh riding conditions. ADD TO YOUR SHOPPING CART       PRICE: $60.00 QTY: