Replacement Hardware / Parts

1- BALL JOINT 16mm X 1.5
2- BALL JOINT JAM NUT
3- REPLACEMENT DUST BOOT
4- SLOTTED NUT 10mm X 1.25
5- HEIM JAM NUT 1/2" X 20
6- CONE SPACER
7- HEIM JOINT 1/2" X 20
8- A-ARM SPREADER TUBE
9- DELRON BUSHINGS
10- GREASE ZERK
11- "OEM" PIVOT TUBE INSERT ***All parts sold as kit to replace all that are needed.***

1) Ball Joint 16mm X 1.5
2) Ball Joint Jam Nut
3) Ball Joint Dust Boot
4) Slotted Nut
5) Z400 '05-'06 Ball Joint Sleeve
6) Cone Spacer
7) Heim Joint 1/2 X 20
8) Heim Joint Jam Nut
9) Delron Bushing or Bearing
10) Grease Zerk
11) Pivot Tube Insert
****Suzuki's use many OEM parts and have many parts that changed from year to year. Please pay close attention to specific models.****

1- BALL JOINT 16mm X 1.5
2- BALL JOINT JAM NUT
3- REPLACEMENT DUST BOOT
4- SLOTTED NUT 12mm X 1.25
5- HEIM JAM NUT 1/2" X 20
6- CONE SPACER
7- HEIM JOINT 1/2" X 20
8- A-ARM PIVOT TUBE INSERT
9- DELRON BUSHINGS
10- GREASE ZERK
***All parts sold as kit to replace all that are needed.

These tie-rods ends are manufactured by the same company making the LSR ball joints. They bolt onto stock or LSR tie-rods and exceed the quality of the OEM tie-rod ends. (Sold as each)

1- 1/2" Axle Spacers
2- Axle Nut 20 X 1.5
3- Hitch Pin Clip
**The 7/8" spacers have been discontinued. If you have the larger spacer you must replace it with (2) 1/2" spacers and a new Axle nut.****

Complete rebuild kits for all LSR twin row bearing housings. Includes 2) Bearings, 2) Seals, 1) Steel center tube, 1) Grease zerk. All Parts should be installed by a professional service technician.

Needle Bearings For All LSR S-Arms. Set of (2) Suzuki Z400 includes (4).

Replacement stainless steel tie-rods for stock or aftermarket a-arm sets. Set of 2. Use all OEM ends.