Rider Support is closed for the 2010 Season
YOUR SHOPPING CART: 0 ITEMS, SUBTOTAL: $0.   

Kawasaki UTV » Teryx Suspension » Teryx XTR-F Upgrade

  • Teryx XTR-F Upgrade  (51-105710)
    If you already own our +5 XTR Suspension Kit, you can upgrade to the ultimate in performance suspension! This kit will supply the needed parts to upgrade your exisiting kit so you can run the new Fox Position Sensitive Shocks.

    It includes the front and rear shock towers that can be bolted in place, or welded to the factory chassis. The rear tower will clear the popular 12 gallon JAZ racing fuel cells.

    This kit is also compatible with the Gear One Mid Board Rear Hub and axle kit, with the use of limiting straps.

    Fox Position Sensitive shocks set up specifically for this kit are required. You can purchase them separately below.
    ADD TO YOUR SHOPPING CART      
    Finish
    PRICE: $428.00 QTY:
15.5" of true useable wheel travel, with 3" of ground clearance at full compression with a 26" diameter tire.

The rear chassis side shock mounts are approx 13" higher and 2.5" wider per side with 10" stroke shock.

The front chassis side shock mounts are approx 7.5" higher and 3" wider per side with 8.5" stroke shock.

The front hood will require cutting if used in the stock location so the shocks and tower can protrude through.

The rear a-arms are compatable with the Gear One Mid Board hub and axle set up, but a limiting strap will need to be used to limit droop to prevent damage of the outer CV joint boot, and CV.

All parts are fabricated from 4130 alloy for both the plates and tubes, and are 100% TIG welded.
HOME | CUSTOMER SERVICE | ATV PRODUCTS | UTV PRODUCTS | CONTACT US | SITE MAP | YOUR CART

Lonestar Racing - 744 W Crescent Ave • Mesa, AZ 85210 • USA - Tel: 800-457-7223 - Fax: 480-834-2987
contact@lsracing.com

Copyright © 2000-2010 Lonestar Racing