CAN AM DEFENDER

Filter
      3 products

      3 products

      Quick view
      CAN-AM DEFENDER REAR A-ARM KIT
      from $1,425.00
      Quick view
      CAN-AM DEFENDER FRONT A-ARM KIT +2.5" FORWARD
      from $1,925.00
      Quick view
      CAN AM DEFENDER COMPLETE A-ARM KIT
      from $3,350.00

      CAN-AM DEFENDER REAR A-ARM KIT

      $1,425.00 Save $-1,425.00
      /
      Shipping calculated at checkout.

      We finally did it! The Lonestar Racing Defender A-Arm kit is here.

      This is for a complete rear upper/lower a-arm kit made with all USA chromoly steel and tig welded for superior strength while keeping the arms nice and light.

      We've added full adjustability of camber and caster into the arms using 5/8" chromoly heim joints on the upper pivot points. The lower pivot points will use the factory bushings and hardware for simplicity and comfort/smoothness. 

      Retains the use of factory style ball joints. 

      Kit is 100% bolt in requiring no modifications or fabrication work.

       

      THIS IS FOR THE REAR KIT ONLY. 

      Parts Stock
      While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

      CAN-AM DEFENDER FRONT A-ARM KIT +2.5" FORWARD

      $1,925.00 Save $-1,925.00
      /
      Shipping calculated at checkout.

      We finally did it! The Lonestar Racing Defender A-Arm kit is here.

      This is for a complete front upper/lower a-arm kit made with all USA chromoly steel and tig welded for superior strength while keeping the arms nice and light.

      This kit stretches the front end 2.5" so you can clear 35s without any additional mods. 

      We've added full adjustability of camber and caster into the arms using 5/8" chromoly heim joints on the lower pivot points. The upper pivot points will use the factory bushings and hardware for simplicity and comfort/smoothness. 

      Retains the use of factory style ball joints. 

      Kit is 100% bolt in requiring no modifications or fabrication work.

       

      THIS IS FOR THE FRONT KIT ONLY. 

      Parts Stock
      While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

      CAN AM DEFENDER COMPLETE A-ARM KIT

      $3,350.00 Save $-3,350.00
      /
      Shipping calculated at checkout.

      We finally did it! The Lonestar Racing Defender A-Arm kit is here.

      This is for a complete front and rear upper/lower a-arm kit made with all USA chromoly steel and tig welded for superior strength while keeping the arms nice and light.

      This kit stretches the front end 2.5" so you can clear 35s without any additional mods. 

      We've added full adjustability of camber and caster into the arms using 5/8" chromoly heim joints on the front lower pivot points and rear upper pivot points. All other pivot points will use the factory bushings and hardware for simplicity and comfort/smoothness. 

      Retains the use of factory style ball joints. 

      Kit is 100% bolt in requiring no modifications or fabrication work.

       

      THIS IS FOR BOTH FRONT AND REAR KITS TOGETHER. YOU CAN PURCHASE THE FRONT OR REAR KIT SEPERATELY ON OUR DEFENDER PAGE.

      Parts Stock
      While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.