Can Am X3 Chassis Gusset Kit

$350.70

Shipping calculated at checkout.

The Lone Star Racing Chassis Gusset Kit for the Can Am X3 is the strongest solution for strengthening the stock frame. This is a weld in kit and it comes with:

Front bulkhead gussets
Steering rack mount gusset
A-Arm mount gussets
Trailing arm mount gussets
Rear upper shock mount gussets

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Quick Shift Race Plate

$132.30

Shipping calculated at checkout.

The Lone Star Racing Quick Shift Race Plate for the Can Am X3 will go over the factory shift gate and allow you to quickly shift between HI/LO and HI/REVERSE. The shift plate is made from durable stainless steel and bolts into place for a secure fit. The kit comes with a billet aluminum LSR shift knob.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Lower A-Arm Kit

$1,025.00

Shipping calculated at checkout.

The Lone Star Racing STS HD Lower A-Arm Kit is a heavy duty, hi-clearance, replacement for the stock XRS width lower a-arms. Made from heavy duty 4130 chromoly with heat treated uniball pins and 7/8" heim joints. Will work on the XDS model but requires XRS length shocks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD A-Arm Kit

$2,122.05

Shipping calculated at checkout.

The Lone Star Racing STS HD A-Arm Kit is a heavy duty, hi-clearance, replacement for the stock XRS width a-arms. Made from heavy duty 4130 chromoly with heat treated uniball pins and 7/8" uniballs on the uppers and 7/8" heim joints on the lowers. Comes with front sway bar links. Will work on the XDS model but requires XRS length shocks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Radius Rods

$308.70

Shipping calculated at checkout.

The Lone Star Racing STS HD Radius Rods for the Can Am X3 are made from 4130 chromoly and use 5/8" rod ends for superior strength. The upper and lower radius rods are the same length and the middle radius rod/toe link comes with our outer box plate kit. This creates a double sheer point on the outer mounting point for added strength and to prevent the bolts from breaking. They are available for the XDS or XRS models.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 MTS Suspension Kit

$6,504.75

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit for the Can Am Maverick X3 is +3" wider per side in the front and +2" wider per side in the rear with stock wheel base.(based off the XRS) The kit will come with high clearance front a-arms, high clearance rear trailing arms, radius rods, tie rods, radius rods double sheer gussets, rear mud flaps, radius rod plate, front sway bar links and all necessary hardware. It will feature 24" of suspension travel in the front and rear.

Available with or without LSR 300M axles(uses stock cv's)
Uses stock length XRS shocks
7/8" uniballs with 300M pins in a-arms
5/8" heavy duty rod ends in radius rods
Made from 4130 chromoly tube for superior strength without the unnecessary weight of boxed arms
Double sheer front sway bar mounts
Comes with toe link outer gussets
All kits now feature adjustable lower A-Arms
Race tested

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Trailing Arms

$2,651.25

Shipping calculated at checkout.

The Lone Star Racing STS HD Trailing Arms for the Can Am X3 are a heavy duty replacement option for the XRS trailing arms. They are made from 4130 chromoly and use a 3/4" HD rod end for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Billet Fuel Rail

$159.00

Shipping calculated at checkout.

The Lone Star Racing Billet Fuel Rail for the Can Am X3 is precision CNC machined billet aluminum and will replace the factory plastic fuel rail that is prone to cracking.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS Suspension Kit

$6,339.90

Shipping calculated at checkout.

The Lone Star Racing STS Suspension Kit for the Can Am Maverick X3 is a direct bolt on kit that is stock length and width for the X3 XRS. The kit will work on the XDS but requires XRS length shocks. The kit will come with high clearance front a-arms, high clearance rear trailing arms, radius rods, tie rods, radius rods double sheer gussets, rear mud flaps, radius rod plate, front and rear sway bar links and all necessary hardware.

Uses stock length XRS shocks
7/8" uniballs with 300M pins in a-arms
5/8" heavy duty rod ends in radius rods
Made from 4130 chromoly tube for superior strength without the unnecessary weight of boxed arms
Double sheer front sway bar mounts
Comes with toe link outer gussets

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Currency

Sign up and save