E-Brake Block Off Plate

$16.80

Shipping calculated at checkout.

The Lone Star Racing E-Brake Block Off Plate is used when you remove the emergency brake system from you rear brake caliper. The plate uses the OEM hardware.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Rear Brake Line

$48.30

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Rear Brake Line is a high performance replacement for the OEM rear brake lines.

Quick guide to OEM brake line lengths:

Honda ATV

250R=22"
250X/300EX=22"
400EX=25"
TRX450=25"

Yamaha ATV

Blaster(LSR swingarm)=17"
Raptor 250=22"
Warrior(LSR swingarm)=17"
Banshee(LSR swingarm)=17"
YFZ450=25"
YFZ450R=21"
Raptor 660=25"
Raptor 700=25"

Suzuki ATV

LT250(LSR swingarm)=25"
LT500(LSR swingarm)=25"
Z400=27"
LTR450=27"

Kawasaki ATV

KFX400=25"
KFX450=25"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Front Brake Line Kit

$114.45

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Front Brake Line Kit features two 54" brake lines that run from the master cylinder to the brake calipers, eliminating the OEM lines that are prone to leak at the "T". The kit will fit stock arms with some slack and extended A-Arms just right.

Universal kit will fit all models unless listed separately

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Billet Brake Line Clamps

$36.33

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Line Clamps are designed to attach your front brake lines directly to the upper a-arms on your ATV.

Sold in pairs(2)
Will work with most aftermarket brake lines
Available in 1", 3/4", or 7/8" diameter

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Axcalibar Pro Racing Axle

$495.60

Shipping calculated at checkout.

The Lone Star Racing Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lone Star Racing accessories can be used. The axles are built from a special stainless material so you no longer have to worry about chrome chipping or rust. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks. Axle is fully adjustable for each riders needs.

Fits 1986-89 models.
Fits 1985 ATC250R but you will be required to use 1986-89 TRX250R style sprocket and sprocket bolts. Might requrie use of our Anti-Fade locknut.
Adjustability is from +1" to +4" wider than stock.
Includes billet aluminum sprocket hub.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Billet Aluminum Anti-Fade Locknut

Honda TRX250R Billet Aluminum Anti-Fade Locknut

$263.55

Shipping calculated at checkout.

The Lonestar Racing Billet Aluminum Anti-Fade Locknut is the perfect solution to the troublesome stock locknut. It combines both the locknut and disc brake hub into one unit that is easily adjusted and will not loosen by itself.

Works with stock or LSR axle
Reuses OEM snap ring

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Billet Bearing Housing

$219.45

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Bearing Housings are machined from 6061 aluminum for superior housing strength. Bearing Carriers are complete, ready to drop in and ride. They come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Steering Stem w/ Anti-Vibe Clamp

Honda TRX250R Steering Stem w/ Anti-Vibe Clamp

$409.50

Shipping calculated at checkout.

The Lone Star Racing Steering Stem is made from 4130 chromoly for superior strength and comes with a billet aluminum Anti-Vibe clamp kit to help reduce vibrations and rider fatigue.

Fits 1986-89
+2+1 is the most popular height
OEM handlebar clamp will not work with stem

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Billet Steering Stem Chassis Clamp

Honda TRX250R Billet Steering Stem Chassis Clamp

$49.35

Shipping calculated at checkout.

The Lone Star Racing Billet Steering Stem Chassis Clamps are trick way to clamp the steering stem to the chassis. They use the stock bushing and come with new hardware. Will mount to stock or after market chassis.

Fits 1986-89

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R & ATC250R Billet Aluminum Rear Wheel Hubs

Honda TRX250R & ATC250R Billet Aluminum Rear Wheel Hubs

$285.60

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Rear Wheel Hubs are one piece rear wheel hubs and are made from 7075 billet aluminum for superior strength and excellent weight savings over stock. The rear wheel hubs have the same pressed in metric studs as stock hubs and will fit the OEM axle as well as the Axcalibar Pro Racing Axle.

Come as a pair
4 x 110 bolt pattern

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Billet Brake Caliper Mounting Kit

$91.35

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Caliper Mounting plate is machined from 6061 aluminum for superior strength. Includes the brake plate, snap ring and locating bushing.

Fits 1986-89

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Pivot Bolt

$77.70

Shipping calculated at checkout.

The Lone Star Racing Pivot Bolt is made from a hardened steel for superior strength over OEM and zinc plated to resist corrosion.

Uses OEM nut.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Swing Arm 1986-87

$910.35

Shipping calculated at checkout.

The Lone Star Racing Honda 250R Swing Arm is made from durable 4130 chromoly steel. It comes with the front needle bearings and uses all other OEM components. It has optional skid plate mounts but always comes with a mount for a Banshee style rear chain guide. All Honda Swing Arms are designed to fit the stock carrier or the LSR Bearing Carriers.

Swing Arm does NOT come with Bearing Carrier or Brake Caliper Plate
Uses Stock Chain Slider (Not Included)
Available in different lengths
1986-87 model years only

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Sport Style A-Arm Kit

$787.50

Shipping calculated at checkout.

The Lone Star Racing Sport Style A-Arms are +2" wider with +1" of forward placement per side. Made from 4130 chromoly for superior strength. They will use a stock length shock but aftermarket shocks are recommended to compensate for additional width. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Fits 1986-89

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Billet Aluminum Front Wheel Hubs

Honda TRX250R Billet Aluminum Front Wheel Hubs

$384.30

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Front Wheel Hubs are a perfect way to improve strength and appearance. They come complete as a pair with high performance, sealed bearings and a billet dust cap.

Available for 1988 or 1989 models only

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Seat Lock

$105.00

Shipping calculated at checkout.

The Lone Star Racing Seat Latch is designed to replace the OEM faulty latches with a design that holds through the roughest terrain.

Fits 1986-89
Comes powdercoated black

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R DC-XC Grab Bar

$95.00

Shipping calculated at checkout.

The Lone Star Racing DC-XC Grab Bar features a 2" drop and wide handles for easy lifting of the quad. It also comes with an integrated flat cross mount to attach a number plate to and a flag mount.

Available in raw aluminum or powder coated

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

1985 Honda ATC250R Billet Bearing Housing

1985 Honda ATC250R Billet Bearing Housing

$219.45

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Bearing Housings are machined from 6061 aluminum for superior housing strength. Bearing Carriers are complete, ready to drop in and ride. They come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles.

Only for 1985 model year

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Swing Arm 1988-89

$910.35

Shipping calculated at checkout.

The Lone Star Racing Honda 250R Swing Arm is made from durable 4130 chromoly steel. It comes with the front needle bearings and uses all other OEM components. It has optional skid plate mounts but always comes with a mount for a Banshee style rear chain guide. All Honda Swing Arms are designed to fit the stock carrier or the LSR Bearing Carriers.

Swing Arm does NOT come with Bearing Carrier or Brake Caliper Plate
Uses Stock Chain Slider (Not Included)
Available in different lengths
1988-89 model years only

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R & ATC250R Billet Sprocket Hub

Honda TRX250R & ATC250R Billet Sprocket Hub

$187.95

Shipping calculated at checkout.

The Lone Star Racing Billet Sprocket Hubs are made to work with the stock or Axcalibar Racing Axles. They are designed to shave weight and provide excellent looks in comparison to OEM hubs. Each hub has been tested under all riding conditions to ensure optimum performance. The hub features zinc coated steel rings where the hub comes in contact with the bearings and seals to prolong long life.

Fits 1985 ATC250R & 1986-1989 TRX250R
All Honda Pattern Hubs are a Press Fit part and must be installed by a professional.
Fitment on the 1985 ATC250R will require the use of 1986-1989 TRX250R style sprocket and sprocket bolts.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R DC-4 A-Arm Kit

$1,101.45

Shipping calculated at checkout.

The Lone Star Racing DC-4 A-Arms are +3" wider with 1" forward placement per side. They will require a longer shock for better performance and handling and feature camber and caster adjustability. The A-Arms are back by our Lifetime Warranty.(excluding wear items)

Shock Specs:

Extended Length: 19.25
Shaft Travel: 5.9
Compressed Length: 13.35
Motion Ratio: 2:1

Fits 1986-89

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Cast Bearing Housing

$208.95

Shipping calculated at checkout.

The Lone Star Racing Cast Bearing Housing features a casted aluminum housing similar to the OEM housing and include heavy duty double row bearings and seals. They are completely sealed and pre-greased so you can just install and ride. Housings are rebuild-able. They fit stock or aftermarket swing arms and axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Currency

Sign up and save