Polaris RZR XP900 Race Axles

$606.90

Shipping calculated at checkout.

The Lone Star Racing Race Axles are based around the RZR 570 CV's due to their high strength and travel capabilities and are made from 300M material. These axles are for either stock width or our MTS suspension kits. They come fully assembled with inner and outer CV joints and axle shafts.

Sold individually

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Heavy Duty Tie Rod Kit

$282.45

Shipping calculated at checkout.

This Lone Star Racing Heavy Duty Tie Rod Kit is lighter and way stronger than stock, and made from race proven materials. What separates these apart from all the other kits, is the inner pivot point is in the same location as stock, so it will give you the least amount of bumpsteer as possible.

The tie rod tubes are made from 4130 and are powder-coated textured black. The machined stud and misalignment spacers are made from tough 17-4 stainless. The rod end is an oversized race proven 5/8" size with kevlar race for noise free operation.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 / XP900 10 Switch Plate Kit

$68.25

Shipping calculated at checkout.

Add style and function to your XP1000 or XP900 dash with our new 3-piece accessory switch plates. Made from quality laser cut steel for precise switch cutouts to ensure a solid fit. Has 10 switch locations allowing you to add 8 more over stock and are available in no finish or standard Polaris colors. Will fit stock and aftermarket rocker style switches. Comes with black button head fasteners for a clean look.

** Requires marking, cutting and trimming to the stock plastic dash when adding additional switches

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Clutch Cover Pin Kit

$76.65

Shipping calculated at checkout.

The clutch cover pin kit for the Polaris RZR XP900 will allow you to quickly take off your clutch cover in seconds to access the belt. The kit will come with enough parts to run 4 clips and tethers and you can choose where they are easiest to access. The kit will come with all 8 pins to help locate the cover.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Shock Kit

$3,139.50

Shipping calculated at checkout.

Features:

Bottom-Out Control (Application specific)
Genuine Kashima coated Aluminum body and reservoir
Aerospace-grade Teflon-lined spherical bearings
Tuned for Race, Dune, Trail or Desert terrain
Fully rebuildable, serviceable and revalveable
3.0" ID dual rate race spring (Application specific)
5/8" Hard-chromed shaft
Hi flow, precision manufactured damping piston

Adjustments:

Dual Speed Compression (DSC)
Wide Range rebound
Spring Preload
Spring Crossover (Application specific)

Set of four shocks

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Axle Shafts

$245.00

Shipping calculated at checkout.

These are replacement axle shafts for either the stock or Lone Star suspension kit. The rear axles are made from 300M and the fronts are 4340.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Rear Radius Rod Plate

$86.10

Shipping calculated at checkout.

The Lone Star Racing Rear Radius Rod Plate is made from 4130 chromoly for superior strength which helps prevent the rear sections of the frame from twisting, bending or breaking.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS Radius Rod Kit

$567.00

Shipping calculated at checkout.

The Lone Star Racing STS Radius Rod Kit are a direct replacement for the OEM Upper and lower radius rods. The rods are made from 4130 chromoly for superior strength and are adjustable.

Upper and lower radius rods included in kit

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS Lower A-Arm Kit

$719.25

Shipping calculated at checkout.

The Lone Star Racing STS Lower A-Arm Kit is a direct replacement for the OEM Upper A-Arms. The arms are made from 4130 chromoly for superior strength and are greasable. They will reuse the OEM pivot hardware and ball joints.

Comes as a pair of lowers only

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS Upper A-Arm Kit

$716.10

Shipping calculated at checkout.

The Lone Star Racing STS Upper A-Arm Kit is a direct replacement for the OEM Upper A-Arms. The arms are made from 4130 chromoly for superior strength and are greasable. They will reuse the OEM pivot hardware and ball joints.

Comes as a pair of uppers only

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS A-Arm Kit

$1,433.25

Shipping calculated at checkout.

The Lone Star Racing STS A-Arm Kit is a direct replacement for the OEM A-Arms. The arms are made from 4130 chromoly for superior strength and are greasable. They will reuse the OEM pivot hardware and ball joints.

Comes as a full set of uppers and lowers

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS Hi Clearance Trailing Arms

$1,878.45

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Trailing Arms are made of 4130 chromoly so they are stronger and will save over 8 lbs off the weight of the stock trailing arms. These trailing arms are designed to have 2.5" more ground clearance just before the tire. They come with HD rod ends and stainless steel inserts. They are compatible with your stock suspension, as well as our MTS kit. Sold as a pair.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 +3" MTS Suspension Kit

$2,551.50

Shipping calculated at checkout.

The Lone Star Racing MTS Supension Kit for the Polaris RZR XP900 features front a-arms that are +3" wider per side with +1" of forward placement that allows up to 16.75" of wheel travel. The rear set up uses the stock trailing arm (can upgrade to the Lone Star stock replacement trailing arms) and adds +2 3/8" of width per side allowing up to 16 3/8" of wheel travel. Made from 4130 chromoly for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 STS Suspension Kit

$4,773.30

Shipping calculated at checkout.

The Lone Star Racing STS Suspension Kit for the Polaris XP900 is designed as a replacement for the stock width suspension. It is made from 4130 chromoly for superior strength. The kit will come with A-Arms, trailing arms, radius rods, radius rod plate and optional LSR axle shafts. The A-Arms are greasable and will reuse the OEM hardware. The radius rods are fully adjustable.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Currency

Sign up and save