E-Brake Block Off Plate

$16.80

Shipping calculated at checkout.

The Lone Star Racing E-Brake Block Off Plate is used when you remove the emergency brake system from you rear brake caliper. The plate uses the OEM hardware.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Rear Brake Line

$48.30

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Rear Brake Line is a high performance replacement for the OEM rear brake lines.

Quick guide to OEM brake line lengths:

Honda ATV

250R=22"
250X/300EX=22"
400EX=25"
TRX450=25"

Yamaha ATV

Blaster(LSR swingarm)=17"
Raptor 250=22"
Warrior(LSR swingarm)=17"
Banshee(LSR swingarm)=17"
YFZ450=25"
YFZ450R=21"
Raptor 660=25"
Raptor 700=25"

Suzuki ATV

LT250(LSR swingarm)=25"
LT500(LSR swingarm)=25"
Z400=27"
LTR450=27"

Kawasaki ATV

KFX400=25"
KFX450=25"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Front Brake Line Kit

$114.45

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Front Brake Line Kit features two 54" brake lines that run from the master cylinder to the brake calipers, eliminating the OEM lines that are prone to leak at the "T". The kit will fit stock arms with some slack and extended A-Arms just right.

Universal kit will fit all models unless listed separately

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Billet Brake Line Clamps

$36.33

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Line Clamps are designed to attach your front brake lines directly to the upper a-arms on your ATV.

Sold in pairs(2)
Will work with most aftermarket brake lines
Available in 1", 3/4", or 7/8" diameter

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Universal ATV Light Mount

$26.25

Shipping calculated at checkout.

The Lone Star Racing Universal ATV Light Mount is designed to attach in between the steering stem and handlebar clamp so you can have light in any direction you turn the bars.

Fits almost every stock and aftermarket ATV steering stem
Works with the Rigid SR & E Series light bars
Comes in flat black powder coat
Available in 6" or 10"
Will not fit on Yamaha OEM steering stems
Does not include light

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Billet Sprocket hub

$263.55

Shipping calculated at checkout.

The Lonestar Racing Billet Sprocket Hub is designed as a slip on hub designed to fit stock or Axcalibar Racing Axles.

Factory 6 bolt pattern

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Axcalibar Pro Racing Axle

$439.95

Shipping calculated at checkout.

The Lone Star Racing Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lone Star Racing accessories can be used. The axles are built from a special stainless material so you no longer have to worry about chrome chipping or rust. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks. Axle is fully adjustable for each riders needs.

Adjustable from +3" to +6"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Billet Locknut

$165.90

Shipping calculated at checkout.

The Lonestar Racing Billet Locknut is designed to replace the two stock steel locking nuts with one Billet Aluminum unit that has double pinch bolts and is threaded to fit all Stock or Axcalibar Racing Axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Billet Aluminum Rear Wheel Hubs

Yamaha Raptor 660 Billet Aluminum Rear Wheel Hubs

$285.60

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Rear Wheel Hubs are one piece rear wheel hubs and are made from 7075 billet aluminum for superior strength and excellent weight savings over stock. The rear wheel hubs have the same pressed in metric studs as stock hubs and will fit the OEM axle as well as the Axcalibar Pro Racing Axle.

Come as a pair
4 x 115 bolt pattern

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Swing Arm

$1,080.45

Shipping calculated at checkout.

The Lone Star Racing Yamaha Raptor 660 Swing Arm is made from 4130 chromoly for superior strength. It comes with the front needle bearings, billet bearing housing and billet brake plate. It has optional skid plate mounts but will always come with a chain guide mount for a Banshee style chain guide.

Uses stock chain slider. (not included)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Sport Style A-Arm Kit

$787.50

Shipping calculated at checkout.

The Lone Star Racing Sport A-Arms are +2" wider with no forward placement per side. They are made from 4130 chromoly steel for superior strength and feature our quick caster adjustments and are camber adjustable as well. The Sport kit will use stock length shocks but we recommend aftermarket shocks to compensate for the additional width. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Uses factory inner pivot tubes at mounting points

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Steering Stem w/ Anti-Vibe Clamp

Yamaha Raptor 660 Steering Stem w/ Anti-Vibe Clamp

$409.50

Shipping calculated at checkout.

The Lone Star Racing Steering Stem is made from 4130 chromoly for superior strength and comes with a billet aluminum Anti-Vibe clamp kit to help reduce vibrations and rider fatigue.

+1+0 height is most popular

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Brake Caliper Mounting Kit

$91.35

Shipping calculated at checkout.

The Lone Star Racing Brake Caliper Mounting Kit is made from steel and is designed to fit the Lone Star Racing swing arm.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Chassis Gusset Kit

$149.10

Shipping calculated at checkout.

The Lone Star Racing Chassis Gusset Kit is designed to improve the strength of the stock chassis by welding in gussets in high stress areas to prevent fatigue.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Billet Disc Brake Hub

$263.55

Shipping calculated at checkout.

The Lone Star Racing Billet Disc Brake Hub is design to reduce weight and improve looks. It will fit on stock or LSR axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 Billet Aluminum Front Wheel Hubs

Yamaha Raptor 660 Billet Aluminum Front Wheel Hubs

$384.30

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Front Wheel Hubs are a perfect way to improve strength and appearance. They come complete as a pair with high performance, sealed bearings and a billet dust cap.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha Raptor 660 DC-4 A-Arm Kit

$1,075.20

Shipping calculated at checkout.

The Lone Star Racing DC-4 A-Arms are +3" wider with no forward placement per side. They are made from 4130 chromoly steel for superior strength and feature our quick camber and quick caster adjustments. The DC-4 kit requires long travel shocks. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Shock Specs:

18 1/4" Extended Length

5" Shaft Travel

2.1:1 Leverage Ratio

Reuses factory inner pivot tubes on lower A-Arms

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Currency

Sign up and save